HP0-Y37 덤프 HP 인증 시험

ITExamDump의HP인증 HP0-Y37덤프는 인터넷에서 검색되는HP인증 HP0-Y37시험공부자료중 가장 출중한 시험준비 자료입니다. HP인증 HP0-Y37덤프를 공부하면 시험패스는 물론이고 IT지식을 더 많이 쌓을수 있어 일거량득입니다.자격증을 취득하여 자신있게 승진하여 연봉협상하세요.

요즘 같은 인재가 많아지는 사회에도 많은 업계에서는 아직도 관련인재가 부족하다고 합니다.it업계에서도 이러한 상황입니다.HP HP0-Y37시험은 it인증을 받을 수 있는 좋은 시험입니다. 그리고ITExamDump는HP HP0-Y37덤프를 제공하는 사이트입니다.

우리ITExamDump 에서 제공하는 학습가이드에는 IT전문가들이 만들어낸 시험대비 자료들과HP HP0-Y37인증시험의 완벽한 문제와 답들입니다. 그리고 우리ITExamDump에서는 IT업계에서의 높은 신뢰감으로 여러분들한테 100%보장을 드립니다. 우리에 믿음을 드리기 위하여HP HP0-Y37관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼수 있게 제공합니다.

요즘같이 시간인즉 금이라는 시대에 시간도 절약하고 빠른 시일 내에 학습할 수 있는 ITExamDump의 덤프를 추천합니다. 귀중한 시간절약은 물론이고 한번에HP HP0-Y37인증시험을 패스함으로 여러분의 발전공간을 넓혀줍니다.

HP HP0-Y37인증시험은 현재IT업계에서 아주 인기 있는 시험입니다.많은 IT인사들이 관연 자격증을 취득하려고 노력하고 있습니다.HP HP0-Y37인증시험에 대한 열기는 식지 않습니다.HP HP0-Y37자격증은 여러분의 사회생활에 많은 도움이 될 것이며 연봉상승 등 생활보장에 업그레이드 될 것입니다.

ITExamDump 에서는 최선을 다해 여러분이HP HP0-Y37인증시험을 패스하도록 도울 것이며 여러분은 ITExamDump에서HP HP0-Y37덤프의 일부분의 문제와 답을 무료로 다운받으실 수 잇습니다. ITExamDump 선택함으로HP HP0-Y37인증시험통과는 물론ITExamDump 제공하는 일년무료 업데이트서비스를 제공받을 수 있으며 ITExamDump의 인증덤프로 시험에서 떨어졌다면 100% 덤프비용 전액환불을 약속 드립니다.

시험 번호/코드: HP0-Y37

시험 이름: HP (Migrating &Troubleshooting Enterprise Networks)

ITExamDump의 인지도는 고객님께서 상상하는것보다 훨씬 높습니다.많은 분들이ITExamDump의 덤프공부가이드로 IT자격증 취득의 꿈을 이루었습니다. ITExamDump에서 출시한 HP인증 HP0-Y37덤프는 IT인사들이 자격증 취득의 험난한 길에서 없어서는 안될중요한 존재입니다. ITExamDump의 HP인증 HP0-Y37덤프를 한번 믿고 가보세요.시험불합격시 덤프비용은 환불해드리니 밑져봐야 본전 아니겠습니까?

HP0-Y37 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y37.html

NO.1 You want to add HP edge switches to a company's Cisco network. Distribution Cisco switches are set as
the Rapid PVST+ root and secondary root. You connect HP A-Series switches that are running their
factory default configuration to the two Cisco distribution switches. What will happen.?
A. If you connect the edge switch with a redundant link to both distribution switches, you create a loop and
a broadcast storm on the Cisco network.
B. Cisco distribution switches send tagged PVST+ BPDUs to the HP switch. Because 802.1q is not yet
configured on HP switch uplinks, the PVST+ BPDUs are dropped. A loop occurs.
C. Cisco distribution switches send untagged standard BPDUs to the HP switch in VLAN 1, and in
response the HP switch blocks one of the uplinks on all VLANs, preventing a loop.
D. Cisco distribution switches send untagged standard BPDUs to HP switch in VLAN 1, which the HP
switch forwards to the other distribution switch, preventing a loop. The HP switch drops all tagged data
frames.
Answer: D

HP인증   HP0-Y37   HP0-Y37 dumps

NO.2 Which statement is true about BGP Route Refresh? (Select two.)
A. Route Refresh is a feature for supported CPU functions with BGP routers that manage high number of
IP Prefixes.
B. Route Refresh is advertised as a BGP capability to BGP neighbors during BGP session
establishment.
C. BGP Route Refresh eliminates the need for a Hard Reset of the BGP connection with a BGP neighbor
when route policies are changed.
D. With Route Refresh, a BGP router stores all BGP prefixes sent by a BGP neighbor.
E. With Route Refresh, a BGP Hard Reset is used to generate inbound updates from a neighbor or to
generate outbound updates to a neighbor.
Answer: B,C

HP덤프   HP0-Y37   HP0-Y37기출문제   HP0-Y37   HP0-Y37자격증

NO.3 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected by MPLS Layer-3 VPNs. The address blocks chosen
by the customers for each site are shown in the following chart:
The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the
MPLS LSR-ID. A traceroute from Cust-A Site #1 to Cust-A Site #2 displays 5 intermediate routers.
Which statements are true? (Select three.)
A. MPLS label TTL expires on P-10.
B. TTL propagation is enabled on PE-1.
C. All but the first trace is processed by PE-2.
D. IP TTL expires on P-20.
E. PE-1 generates ICMP echo replies on behalf of P-10 and P-20.
F. TTL propagation is disabled on PE-1.
Answer: A,B,C

HP   HP0-Y37덤프   HP0-Y37최신덤프   HP0-Y37   HP0-Y37   HP0-Y37 dumps

NO.4 DRAG DROP
Click the Task button. In a multihome AS, you are replacing one of the BGP-configured Cisco routers with
a BGP-configured HP A-Series router. You want to reduce the downtime during the migration process.
Place the steps for the migration in the correct order.
Answer:

NO.5 Click the Exhibit button and view the three exhibits.
When interface Serial 4 of Router 2 fails, traffic from Router 1 destined for network 156.152.0.0/16 leaves
AS 65001 via the Serial 3 interface of Router 1. The administrator prefers that this traffic leaves AS 65001
through interface Serial 5 of Router 2. Which configuration change will achieve the desired results?
A. Router-2#
bgp 100
peer 16.0.0.1 next-hop-local
B. Router-2#
route-policy Policy permit node 10
apply local-preference 500
bgp 100
peer 156.152.5.1 route-policy Policy
C. Router-2#
route-policy Policy permit node 10
apply preferred-value 500
bgp 100
peer 156.152.5.1 route-policy Policy
D. Router-1#
route-policy Policy permit node 10
apply preferred-value 500
bgp 100
peer 16.0.0.2 route-policy Policy
Answer: A

HP   HP0-Y37   HP0-Y37덤프   HP0-Y37 pdf

NO.6 Click the Exhibit button.
You are replacing a Cisco BGP router with an HP A-Series BGP router. Examine the router's
configurations. Which statements accurately describe the routers' configurations? (Select three.)
A. Both configurations are identical in function.
B. The HP A-Series router will not implement the same BGP functions as the Cisco router.
C. Both BGP routers announce a static route to its BGP neighbor.
D. Both BGP routers announce network 215.34.10.0/22.
E. Neither BGP routers can announce a redistributed static route because no metrics are set.
F. The A-Series router's prefix list is misconfigured.
Answer: A,C,D

HP   HP0-Y37   HP0-Y37 pdf   HP0-Y37

NO.7 You want to enable RRPP on interface Gigabit Ethernet 1/0/4 of an HP A-Series switch. Which
commands should be configured on this interface? (Select two.)
A. stp disable
B. rrrp ring 1 enable
C. port link-type trunk
D. port link-type rrpp
E. stp enable
Answer: A,C

HP   HP0-Y37   HP0-Y37   HP0-Y37

NO.8 Which statements about BPDU Guard are correct? (Select three.)
A. It is a Cisco proprietary protocol that prevents other switches from sending BDPUs.
B. BPDU Guard filters the standard BDPUs received on the port.
C. BPDU Guard filters the PVST BDPUs received on the port.
D. BPDU Guard generates an alarm when a BPDU is received on the port and may block the port.
E. BPDU Guard is an open standard.
F. BPDU Guard is not a protocol. It must be applied locally and individually on switches.
Answer: B,D,F

HP자료   HP0-Y37자료   HP0-Y37시험문제   HP0-Y37 dump

NO.9 A provider of MPLS services configures MPLS Layer-3 VPN services for three customers. Each
customer has three branch offices that will be interconnected by MPLS Layer-3 VPNs. One customer is
advertising their IP prefixes between sites using BGP. This customer establishes a backup link directly
connecting Site-1 to Site-2. Which BGP attribute can the provider use to prevent routing update loops in
the MPLS network?
A. COO
B. FOO
C. KOO
D. SOO
E. VOO
Answer: D

HP   HP0-Y37   HP0-Y37

NO.10 What is a characteristic of load balancing in RRPP?
A. multiple RRPP rings within a domain
B. overlapping RRPP rings
C. multiple RRPP domains with different root priorities
D. It is not possible to load balance with RRPP.
E. multiple RRPP domains sharing the same ring
Answer: E

HP자격증   HP0-Y37 dumps   HP0-Y37 dumps   HP0-Y37 dumps   HP0-Y37

NO.11 Click the Exhibit button.
A provider of MPLS services configures MPLS Layer-3 VPN services for two customers. Each customer
has three branch offices that will be interconnected by MPLS Layer-3 VPNs. The following are address
blocks chosen by the customers for each site as shown in the chart:
The provider uses OSPF as its IGP with the Loopback 0 addresses shown as the OSPF router-id and the
MPLS LSR-ID. Customer A uses a default route on each site. Customer B uses eBGP to exchange routes
with the provider. All MPLS layer-3 VPNs are functioning properly. Which configuration change will cause
Customer-A Site 1 to lose access to Customer-A Site 2?
A. [PE-1]
bgp 1
undo import-route static
B. [P-10]
ospf 1
area 0
abr-summary 16.0.0.2 30 cost 1000
C. [PE-1]
int vlan 100
undo mpls ldp
D. [PE-3]
bgp 1
undo peer 16.0.0.1 reflect-client
E. [P-10]
ip route static 10.1.0.0 16 null 0 preference 9
Answer: B

HP시험문제   HP0-Y37   HP0-Y37

NO.12 Which statements are true about DHCP Snooping? (Select two.)
A. DHCP Snooping is a Cisco Proprietary protocol. The standard is not yet ratified.
B. DHCP Snooping prevents end nodes from receiving IP address assignments from an unauthorized
DHCP server.
C. DHCP Snooping is a malicious attack against the DHCP servers.
D. The DHCP Snooping binding table contains information about hosts interconnected with a trusted
interface.
E. DHCP Snooping is when a switch acts as a DHCP server for end nodes that connect to that particular
switch. This way, end nodes always get an IP address.
F. When configuring DHCP Snooping on a switch, you define which ports are trusted to receive DHCP
offers. Typically uplinks of a switch are trusted and Edge ports are untrusted.
Answer: B,F

HP   HP0-Y37 dumps   HP0-Y37

NO.13 A company's LAN is composed of Cisco switches only. The network runs Rapid PVST+ with the short
pathcost method. Cisco distribution switches are set as root and secondary root in all VLANs. These two
switches connect over an Etherchannel. The company wants to install HP PoE switches at the edge of its
LAN. The customer wants to keep the load-balancing of traffic that is set in PVST+. What are the possible
options? (Select three.)
A. ensure Spanning Tree is disabled on the HP edge switch, and configure loop-protection on edge ports
to avoid local loops
B. if the HP edge switch is an A-Series switch, configure Smart Link with load balancing between
instances
C. if the HP edge switch is an A-Series switch, configure Rapid PVST+ on it
D. configure MSTP on the HP edge switch, but set the cost of its uplink higher than that on the channel
between the distribution switches
E. configure MSTP on the HP edge switch and divide the VLANs into different instances
F. configure MSTP on the HP edge switch and set its uplink port cost to 5
G. configure MSTP on the HP edge switch, but set the cost of its uplink lower than that on the channel
between the distribution switches
Answer: A,B,D

HP   HP0-Y37시험문제   HP0-Y37시험문제   HP0-Y37자격증   HP0-Y37

NO.14 Which protocols are supported on the HP A-Series switch? (Select three.)
A. SSH v1 only
B. SSH v1 and v2
C. RADIUS only
D. TACACS+ and RADIUS
E. TACACS and RADIUS
F. SNMPv2c only
G. SNMPv2c and SNMPv3
Answer: B,D,G

HP   HP0-Y37   HP0-Y37 dump   HP0-Y37

NO.15 Click the Exhibit button.
Which statements are true about the BGP configuration of this HP A-Series router? (Select two.)
A. The router announces IP prefix 200.1.0.0/23 to its BGP neighbor if the network is in routing table.
B. The as-path ACL define networks that were last forwarded by AS 200.
C. The configuration includes a filter out to the neighbor 222.222.10.1.
D. The BGP router is in AS 200 and its BGP neighbor is in AS 100.
E. The BGP router will establish a BFD connection with its BGP neighbor 222.222.10.1 if the neighbor is
also configured for BFD
Answer: A,E

HP dump   HP0-Y37   HP0-Y37   HP0-Y37

ITExamDump의 HP 인증 HP0-Y37시험덤프공부자료는 pdf버전과 소프트웨어버전 두가지 버전으로 제공되는데 HP 인증 HP0-Y37실제시험예상문제가 포함되어있습니다.덤프의 예상문제는 HP 인증 HP0-Y37실제시험의 대부분 문제를 적중하여 높은 통과율과 점유율을 자랑하고 있습니다. ITExamDump의 HP 인증 HP0-Y37덤프를 선택하시면 IT자격증 취득에 더할것 없는 힘이 될것입니다.