Oracle 인증한 1Z0-026 덤프

Oracle인증 1Z0-026시험패스는 IT업계종사자들이 승진 혹은 연봉협상 혹은 이직 등 보든 면에서 날개를 가해준것과 같습니다.IT업계는 Oracle인증 1Z0-026시험을 패스한 전문가를 필요로 하고 있습니다. ITExamDump의Oracle인증 1Z0-026덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.

빨리 ITExamDump 덤프를 장바구니에 넣으시죠. 그러면 100프로 자신감으로 응시하셔서 한번에 안전하게 패스하실 수 있습니다. 단 한번으로Oracle 1Z0-026인증시험을 패스한다…… 여러분은 절대 후회할 일 없습니다.

시험 번호/코드: 1Z0-026
시험 이름: Oracle (Network Administration)

ITExamDump의 Oracle 1Z0-026덤프를 구매하기전 우선 pdf버전 덤프샘플을 다운받아 덤프문제를 공부해보시면ITExamDump덤프품질에 신뢰가 느껴질것입니다. ITExamDump의 Oracle 1Z0-026덤프가 고객님의 시험패스테 조금이나마 도움이 되신다면 행복으로 느끼겠습니다.

Oracle 인증1Z0-026시험에 도전해보려고 하는데 공부할 내용이 너무 많아 스트레스를 받는 분들은 지금 보고계시는 공부자료는 책장에 다시 넣으시고ITExamDump의Oracle 인증1Z0-026덤프자료에 주목하세요. ITExamDump의 Oracle 인증1Z0-026덤프는 오로지 Oracle 인증1Z0-026시험에 대비하여 제작된 시험공부가이드로서 시험패스율이 100%입니다. 시험에서 떨어지면 덤프비용전액환불해드립니다.

1Z0-026 덤프무료샘플다운로드하기: http://www.itexamdump.com/1Z0-026.html

NO.1 The listener audit trail provides information about every client connection request.
Which additional request about the client is NOT provided?
A. Client user ID
B. Database user name
C. Network protocol
D. Client host (platform)
Answer: B

Oracle기출문제   1Z0-026덤프   1Z0-026 pdf   1Z0-026자격증

NO.2 If a password is configured, which command must be issued first when you need to
stop the listener?
A. Stop
B. Password
C. Set Password
D. Shutdown immediate
Answer: C

Oracle자격증   1Z0-026시험문제   1Z0-026자격증   1Z0-026기출문제   1Z0-026시험문제

NO.3 You are using host naming. Which components need to be installed?
A. Net8 on the server and the client machine.
B. TCP/IP and Net8 only on the client machine.
C. TCP/IP and Net8 only on the server machine.
D. TCP/IP and Net8 on the server and the client machine.
Answer: D

Oracle   1Z0-026최신덤프   1Z0-026   1Z0-026시험문제   1Z0-026 dump

NO.4 When is the request sent to a listener?
A. After every call.
B. Before every call.
C. After name resolution.
D. Before name resolution.
Answer: C

Oracle   1Z0-026   1Z0-026 dumps   1Z0-026기출문제

NO.5 The initial number of dispatchers is set to 50. Because of the load on the dispatcher
processes the DBA needs to decrease the number of dispatchers. Which two
recommended procedures could be used? (Choose two)
A. Issue the ALTER SYSTEM command to remove dispatchers.
B. Issue the ALTER SESSION command to remove dispatchers.
C. Edit the MTS_DISPATCHERS parameter and bounce the database.
D. Edit the MTS_MAX_DISPATCHERS parameter and bounce the database.
E. Edit the MTS_MIN_DISPATCHERS parameter and bounce the database.
Answer: A, C

Oracle   1Z0-026덤프   1Z0-026

NO.6 You setup MTS for the PROD database, which uses multiple listeners to handle
requests. Which listener control command can you issue for each listener that the
dispatchers have registered with all listeners used by the database?
A. DISPATCHER<listener name>
B. SHOW ALL
C. SERVICES<listener name>
D. SHOW SERVICES<listener name>
E. SHOW DISPATCHER<listener name>
Answer: C

Oracle pdf   1Z0-026 pdf   1Z0-026최신덤프

NO.7 Which naming method simplifies administrative tasks when configuration changes
need to be made available to all clients immediately?
A. Host Naming
B. Local Naming
C. Service Naming
D. Centralized Naming
Answer: D

Oracle덤프   1Z0-026 pdf   1Z0-026   1Z0-026 dumps

NO.8 In which file is the information that host naming is enabled stored?
A. Init.ora
B. Sqlnet.ora
C. Tnsnames.ora
D. Listener.ora
Answer: B

Oracle최신덤프   1Z0-026자료   1Z0-026   1Z0-026덤프

NO.9 Which statement regarding the logging and tracing of Net8 is True?
A. Logging cannot be disabled on client.
B. There are four levels of logging that can be set.
C. Tracing can take up significant disk space but has little impact on performance.
D. There is no way to prevent new trace data from being appended to the same file with
each new session.
Answer: B

Oracle덤프   1Z0-026   1Z0-026

NO.10 Which folder would you use in the Net8 Assistant Tool to change the naming
method?
A. Profile
B. Configuration
C. Service Names
D. Oracle Names Server
Answer: A

Oracle시험문제   1Z0-026 pdf   1Z0-026자료

NO.11 Which statement is true regarding connection breaks?
A. In-band breaks are faster than out-band breaks.
B. In-band breaks use messages that invoke operating system signals.
C. In-band breaks are issued to the server process by the operating system.
D. Out-band breaks send urgent data messages and are faster than in-band breaks.
E. There are no fundamental differences between in-band breaks and out-band breaks.
Answer: D

Oracle   1Z0-026자료   1Z0-026덤프   1Z0-026

NO.12 Which parameter specifies the maximum number of server processes that get
pre-spawned in a dedicated server environment? (Do not use any extra words or
characters)
Answer: MTS_MAX_SERVERS

NO.13 When configuring for multiple protocol interchange, what does Source_Route
indicate?
A. Enables connections through Connection Manager.
B. Identifies the service name to which the connection needs to be established.
C. Identifies the database SID to which the connection needs to be established.
D. Identifies the node and the port number on which connection manager is running.
Answer: A

Oracle dumps   1Z0-026   1Z0-026 dump

NO.14 Which NAMESCTL command can be used to manually force Names Server discovery?
A. Flush
B. Reload
C. Reorder_NS
D. Discover_NS
E. Start_client_cache
Answer: C

Oracle   1Z0-026 pdf   1Z0-026자료   1Z0-026 dump

NO.15 How many response queues are present in a multithreaded server environment?
A. One per system.
B. One per database.
C. One per listener.
D. One per dispatcher.
Answer: D

Oracle기출문제   1Z0-026   1Z0-026자격증   1Z0-026최신덤프   1Z0-026인증   1Z0-026자료

NO.16 A DBA has installed and configured Net8 TCP/IP on the client and the server but is
still unable to connect from Windows NT Workstation using SQL*Plus to an Oracle
instance running on a remote UNIX server. However there are no problems when
using FTP between two nodes. What actions next taken by the DBA could make
progress towards diagnosing the problem?
A. Attempting to PING the server from the client.
B. Checking to see if the DNS configuration is correct.
C. Connecting by using the Net8 Assistant Test Connection feature.
D. Checking to see if the TNS ping process is running on the server.
Answer: C

Oracle   1Z0-026   1Z0-026자료   1Z0-026덤프

NO.17 Which feature needs to be configured in Connection Manager to enable your system to
scale to a large number of users?
A. Connection Pooling
B. Network access control
C. Connection concentration
D. Multiple protocol interchange
Answer: C

Oracle인증   1Z0-026 pdf   1Z0-026최신덤프   1Z0-026 dumps   1Z0-026덤프

NO.18 Which are two features of Connection Manager? (Choose two)
A. Connection exchange.
B. Connection resolution.
C. Connection multiplexing.
D. Connection cross-linking.
E. Protocol transformation.
F. Protocol interchange capability.
Answer: C, F

Oracle pdf   1Z0-026   1Z0-026최신덤프

NO.19 Which two are tasks of the dispatcher process? (Choose two)
A. Receiving connection requests.
B. Placing a request in the request queue.
C. Updating the listener with new LOAD values.
D. Determining if the client request can be processed.
Answer: B, C

Oracle dumps   1Z0-026 pdf   1Z0-026 dumps   1Z0-026

NO.20 Which process picks up a request from a response queue?
A. Client process
B. Listener process
C. Dispatcher process
D. Shared server process
Answer: C

Oracle   1Z0-026시험문제   1Z0-026

ITExamDump는 유일하게 여러분이 원하는Oracle인증1Z0-026시험관련자료를 해결해드릴 수 잇는 사이트입니다. ITExamDump에서 제공하는 자료로 응시는 문제없습니다, 여러분은 고득점으로 시험을 통과할 것입니다.