ITExamDump 에서 제공해드리는 IBM C2090-611덤프는 아주 우수한 IT인증덤프자료 사이트입니다. IT업계엘리트한 강사들이 퍼펙트한 IBM C2090-611 덤프문제집을 제작하여 디테일한 시험문제와 답으로 여러분이 아주 간단히IBM C2090-611시험을 패스할 수 있도록 최선을 다하고 있습니다.
IBM인증 C2090-611시험을 통과하여 자격증을 취득하여 IT 업계에서의 자신의 자리를 지키려면 많은 노력이 필요합니다. 회사일도 바쁜데 시험공부까지 스트레스가 장난아니게 싸이고 몸도 많이 상하겠죠. ITExamDump는 여러분을 위해 최신IBM인증 C2090-611시험에 대비한IBM인증 C2090-611덤프를 발췌하였습니다. IBM인증 C2090-611덤프는IBM인증 C2090-611시험의 기출문제와 예상문제가 묶어져 있어 시험적중율이 굉장히 높습니다. 쉽게 시험을 통과하려면ITExamDump의 IBM인증 C2090-611덤프를 추천합니다.
ITExamDump의IBM인증 C2090-611덤프는 몇십년간 IT업계에 종사한 전문가들이IBM인증 C2090-611 실제 시험에 대비하여 제작한 시험준비 공부가이드입니다. IBM인증 C2090-611덤프공부가이드로 시험준비공부를 하시면 시험패스가 쉬워집니다. 공부하는 시간도 적어지고 다른 공부자료에 투자하는 돈도 줄어듭니다. ITExamDump의IBM인증 C2090-611덤프는 IBM인증 C2090-611시험패스의 특효약입니다.
시험 번호/코드: C2090-611
시험 이름: IBM (DB2 10.1 DBA for Linux, UNIX, and Windows)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 118 문항
업데이트: 2014-03-30
어떻게IBM인증C2090-611시험을 패스하느냐 에는 여러 가지 방법이 있습니다. 하지만 여러분의 선택에 따라 보장도 또한 틀립니다. 우리ITExamDump 에서는 아주 완벽한 학습가이드를 제공하며,IBM인증C2090-611시험은 아주 간편하게 패스하실 수 있습니다. ITExamDump에서 제공되는 문제와 답은 모두 실제IBM인증C2090-611시험에서나 오는 문제들입니다. 일종의 기출문제입니다.때문에 우리ITExamDump덤프의 보장 도와 정확도는 안심하셔도 좋습니다.무조건IBM인증C2090-611시험을 통과하게 만듭니다.우리ITExamDump또한 끈임 없는 덤프갱신으로 페펙트한IBM인증C2090-611시험자료를 여러분들한테 선사하겠습니다.
이 글을 보시게 된다면IBM인증 C2090-611시험패스를 꿈꾸고 있는 분이라고 믿습니다. IBM인증 C2090-611시험공부를 아직 시작하지 않으셨다면 망설이지 마시고ITExamDump의IBM인증 C2090-611덤프를 마련하여 공부를 시작해 보세요. 이렇게 착한 가격에 이정도 품질의 덤프자료는 찾기 힘들것입니다. ITExamDump의IBM인증 C2090-611덤프는 고객님께서 IBM인증 C2090-611시험을 패스하는 필수품입니다.
C2090-611 덤프무료샘플다운로드하기: http://www.itexamdump.com/C2090-611.html
NO.1 What unit of measurement is used to represent the cumulative total cost of a node in a Visual Explain
access plan diagram?
A. CPU cycles
B. Elapsed time, in milliseconds
C. Processing instructions performed
D. Timerons
Answer: D
IBM C2090-611자격증 C2090-611 C2090-611
NO.2 In IBM Data Studio, where can you schedule script-based jobs?
A. Job Console
B. Job Manager
C. Task Manager
D. Utilities Console
Answer: B
IBM최신덤프 C2090-611 C2090-611 C2090-611 C2090-611 C2090-611
NO.3 What is the correct procedure for recovering a dropped table when DROPPED TABLE RECOVERY has
been enabled and the database must remain online?
A. Run the RECOVER DATABASE command with the RECOVER DROPPED TABLE option to restore the
database and recover the droppedtable.
B. Run the RECOVER DATABASE command with the RECOVER DROPPED TABLE option to restore the
appropriate table space and recover thedropped table.
C. Restore the database from a backup image that was taken before the table was dropped; run the
ROLLFORWARD DATABASE command withthe RECOVER DROPPED TABLE option to restore the
database and recover the dropped table.
D. Restore the appropriate table space from a backup image that was taken before the table was dropped;
run the ROLLFORWARD DATABASEcommand with the RECOVER DROPPED TABLE option to restore
the appropriate table space and recover the dropped table.
Answer: D
IBM dumps C2090-611 C2090-611 C2090-611 C2090-611자료
NO.4 A table named SALES was created as follows:
If management wants to use Label-Based Access Control (LBAC) to protect individual rows in the SALES
table, and the security policy needed (SEC_POLICY) has already been created, what must be done to
protect the table as desired?
A. Associate the SEC_POLICY security policy with the SALES table.
B. Add a column with the DB2SECURITYLABEL data type to the SALES table.
C. Add a column with the DB2SECURITYLABEL data type to the SALES table and then associate the
SEC_POLICY security policy with the table.
D. Add a SECURED WITH clause to every column in the SALES table and then associate the
SEC_POLICY security policy with the SALES table.
Answer: C
IBM C2090-611최신덤프 C2090-611 C2090-611자료 C2090-611인증
NO.5 Due to a hardware failure, it appears that there may be some corruption in database DB_1 as DB2 is
reporting a "bad page". DB2DART is performed for the entire database and it appears that several bad
pages were detected in table space TBSP_1.
What command can be used to recover the database and repair the corruption in table space TBSP_1?
A. RESTART DATABASE
B. RECOVER DATABASE
C. RESTORE TABLESPACE
D. ROLLFORWARD DATABASE
Answer: B
IBM C2090-611덤프 C2090-611덤프
NO.6 The values of the automatic maintenance database configuration parameters for a database named
SAMPLE are as follows:
What commands must be run to enable real-time statistics collection on the SAMPLE database?
A. UPDATE DB CFG FOR sample USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample
USING AUTO_STMT_STATS ON;
B. UPDATE DB CFG FOR sample USING AUTO_TBL_MAINT ON; UPDATE DB CFG FOR sample
USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample USING AUTO_STMT_STATS ON;
C. UPDATE DB CFG FOR sample USING AUTO_TBL_MAINT ON; UPDATE DB CFG FOR sample
USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample USING AUTO_STATS_VIEWS ON; D.
UPDATE DB CFG FOR sample USING AUTO_RUNSTATS ON; UPDATE DB CFG FOR sample USING
AUTO_STATS_VIEWS ON;
Answer: B
IBM C2090-611 C2090-611 C2090-611 pdf
NO.7 Where are column mask definitions stored?
A. In the table definition
B. In the system catalog
C. In the table space metadata
D. In the database configuration file
Answer: B
IBM시험문제 C2090-611 C2090-611 dump C2090-611
NO.8 What are two types of security label components that can be used with Label-Based Access Control
(LBAC)? (Choose two).
A. Set
B. Tree
C. Group
D. Range
E. Hierarchy
Answer: A,B
IBM덤프 C2090-611 C2090-611
NO.9 If a single node database is actively being used by applications when a power failure occurs, what
method is used to bring the database back to a consistent state once power has been restored.?
A. Crash recovery
B. Version recovery
C. Disaster recovery
D. Roll-forward recovery
Answer: A
IBM C2090-611기출문제 C2090-611덤프 C2090-611 C2090-611
NO.10 What is the MAX_LOG database configuration parameter used for?
A. To limit how many log files a single transaction can span.
B. To limit the percentage of primary log space a running transaction can consume.
C. To limit the total number of primary and secondary log files a database can consume.
D. To limit the total number of secondary log files a transaction can consume before infinite logging is
enabled.
Answer: B
IBM C2090-611 C2090-611
NO.11 If the current value for self-tuning memory is: Self Tuning Memory (SELF_TUNING_MEM) = ON
(Inactive) Which statement is true?
A. Self-tuning is occurring only on the instance memory area.
B. The memory tuner is actively tuning the memory on the system.
C. Self-tuning is not occurring because it is waiting for the database to be recycled.
D. Self-tuning is not occurring because there are less than two memory consumers enabled.
Answer: D
IBM자격증 C2090-611기출문제 C2090-611 C2090-611
NO.12 Which command can be used to restore a corrupted database using only the recovery history file?
A. RESTART DATABASE
B. RECOVER DATABASE
C. RESTORE DATABASE
D. ROLLFORWARD DATABASE
Answer: B
IBM C2090-611 dumps C2090-611자료 C2090-611 C2090-611시험문제
NO.13 Which command will define the alternate diagnostic data directory path as /db2data/db2dump2?
A. db2set ALT_DIAGPATH=/db2data/db2dump2
B. db2set SECONDARY_DIAGPATH=/db2data/db2dump2
C. UPDATE DBM CFG USING ALT_DIAGPATH /db2data/db2dump2
D. UPDATE DBM CFG USING SECONDARY_DIAGPATH /db2data/db2dump2
Answer: C
IBM인증 C2090-611 C2090-611
NO.14 Which statement is correct when describing trusted contexts?
A. A trusted context defines a trust relationship for a connection between the database and an external
entity.
B. A trusted context promotes the authorization level of the connection initiator and grants them DBADM
authority.
C. A trusted context defines a trust relationship between a user and a table allowing that user additional
capabilities.
D. A trusted context gives the database connection the ability to bypass auditing since authentication has
already occurred.
Answer: A
IBM C2090-611 C2090-611 C2090-611
NO.15 You have an High Availability and Disaster Recovery (HADR) environment set up and you want to read
from the standby database. What must you do?
A. Assign the value ON to the DB2_HADR_ROS registry variable.
B. Assign the value ON to the DB2_HADR_SNAP registry variable.
C. Execute the STOP HADR command to temporarily break the HADR connection to the standby.
D. Execute the TAKEOVER HADR command to instruct the standby database to takeover as the new
primary database.
Answer: A
IBM최신덤프 C2090-611 dump C2090-611 pdf C2090-611 dump
ITexamdump의 HH0-240덤프의 VCE테스트프로그램과 200-120덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1z0-481시험에 대비한 고품질 덤프와 C4040-123시험 최신버전덤프를 제공해드립니다. 최고품질 74-409시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기