IBM 인증 C2050-241 덤프

IBM인증 C2050-241시험패스는 IT업계종사자들이 승진 혹은 연봉협상 혹은 이직 등 보든 면에서 날개를 가해준것과 같습니다.IT업계는 IBM인증 C2050-241시험을 패스한 전문가를 필요로 하고 있습니다. ITExamDump의IBM인증 C2050-241덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.

최근 더욱 많은 분들이IBM인증C2050-241시험에 도전해보려고 합니다. ITExamDump에서는 여러분들의 시간돠 돈을 절약해드리기 위하여 저렴한 가격에 최고의 품질을 지닌 퍼펙트한IBM인증C2050-241시험덤플르 제공해드려 고객님의 시험준비에 편안함을 선물해드립니다. ITExamDump제품을 한번 믿어보세요.

ITExamDump의 연구팀에서는IBM C2050-241인증덤프만 위하여 지금까지 노력해왔고 ITExamDump 학습가이드IBM C2050-241덤프로 시험이 어렵지 않아졌습니다. ITExamDump는 100%한번에IBM C2050-241이장시험을 패스할 것을 보장하며 우리가 제공하는 문제와 답을 시험에서 백프로 나올 것입니다.여러분이IBM C2050-241시험에 응시하여 우리의 도움을 받는다면 ITExamDump에서는 꼭 완벽한 자료를 드릴 것을 약속합니다. 또한 일년무료 업데이트서비스를 제공합니다.즉 문제와 답이 갱신이 되었을 경우 우리는 여러분들한테 최신버전의 문제와 답을 다시 보내드립니다.

IBM C2050-241인증덤프가 ITExamDump전문가들의 끈임 없는 노력 하에 최고의 버전으로 출시되었습니다. 여러분의 꿈을 이루어드리려고 말이죠. IT업계에서 자기만의 자리를 잡고 싶다면IBM C2050-241인증시험이 아주 좋은 자격증입니다. 만약IBM C2050-241인증시험 자격증이 있다면 일에서도 많은 변화가 있을 것입니다, 연봉상승은 물론, 자기자신만의 공간도 넓어집니다.

시험 번호/코드: C2050-241
시험 이름: IBM (IBM Sterling Order Management V9.2, Solution Design)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 54 문항
업데이트: 2014-03-23

ITExamDump는 여러분을 성공으로 가는 길에 도움을 드리는 사이트입니다. ITExamDump에서는 여러분이 안전하게 간단하게IBM인증C2050-241시험을 패스할 수 있는 자료들을 제공함으로 빠른 시일 내에 IT관련지식을 터득하고 한번에 시험을 패스하실 수 있습니다.

C2050-241 덤프무료샘플다운로드하기: http://www.itexamdump.com/C2050-241.html

NO.1 A customer purchased a DVD player from a store, and later realized that some of the required
features were missing. The customer tries to return the DVD player for a refund, but the sales order
cannot be located in the Sterling application. Which type of return should be created in the Sterling
application?
A. Refund Order
B. Exchange Order
C. Blind Return Order
D. Speed Exchange Order
Answer: C

IBM   C2050-241   C2050-241

NO.2 A business needs to configure a drop ship from a vendor to a customer directly with visibility
into the purchase order (PO) created by the vendor and status updates on the PO. What should be
done to meet this requirement?
A. 1. Model the vendor as a seller and node, where the organization does not have a hierarchical
relation with the seller organization on theorder.2. Do not check "Suppress chained order creation
even if seller requires" setting.3. Run Chained_Order_Create to create the purchase order.PO
getting shipped will result in the corresponding sales order line being shipped.
B. 1. Model the vendor as a seller and node, where the organization has a hierarchical relation with
the seller organization on the order.2. Check the "Suppress chained order creation even if seller
requires" setting.3. Run Chained_Order_Create to create the purchase order.PO getting shipped will
result in the corresponding sales order line being shipped.
C. 1. Model the vendor as a seller and node, where the organization has a hierarchical relation with
the seller organization on the order.2. Check the "Suppress chained order creation even if seller
requires" setting.3. Run Chained_Order_Create to create the PO. Place custom logic on PO
"Shipped" event to update the corresponding sales order status to"Shipped".
D. 1. Model the vendor as a seller and node, where the organization does not have a hierarchical
relation with the seller organization on theorder.2. Implement a listener on the PO pipeline that
updates the sales order pipeline.3. Implement custom logic to stamp the PO's delivery location as
customer's address.PO getting shipped will result in the corresponding sales order line being
shipped.
Answer: A

IBM인증   C2050-241   C2050-241   C2050-241   C2050-241

NO.3 In the integration between Sterling Order Management V9.2 and WebSphere Commerce,
which of the following actions will a customer service representative be UNABLE to take when
entering orders through the Sterling application?
A. Make manual adjustments in an order.
B. Enter orders for a customer who has no customer ID.
C. Pre-populate customer information from WebSphere Commerce.
D. Tell customers about promotions and discounts applied to the order.
Answer: C

IBM   C2050-241   C2050-241인증   C2050-241   C2050-241기출문제   C2050-241인증

NO.4 Which of the following Sterling Call Center business requirements CANNOT be implemented
using the out of the box application?
A. Monitor orders for FTC compliance.
B. Schedule appointments for delivery items.
C. Initiate returns and refunds to customers immediately, if required.
D. Retrieve a WebSphere Commerce shopping cart from the Sterling Call Center.
Answer: D

IBM dump   C2050-241   C2050-241자격증   C2050-241   C2050-241

NO.5 A customer would like a purchase order (PO) to be "Created", but it should only treat 80% of
future supply as available. This should happen until the PO receives a status update that indicates its
been "Approved", at which point 90% of the future supply can be considered for promising. Future
supply can be considered when scheduling orders but should not be considered when releasing the
pick instructions to the fulfillment center. In order to model this requirement with MINIMAL custom
logic, the solution design must:
A. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Set up the
appropriate safety factor of 80% for supply type "Purchase order placed" and 90% for supply type
"Inbound approved".5. Use Inventory considerations to map the demand type corresponding to
schedule transaction to future supplies.6. Use Inventory considerations to map the demand type
corresponding to release transaction to use only onhand supplies.
B. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Set up the
appropriate safety factor of 80% for demand type "Scheduled" and 90% for demand type
"Released".5. Use Inventory considerations to map the demand type corresponding to schedule
transaction to future supplies.6. Use Inventory considerations to map the demand type
corresponding to release transaction to use only onhand supplies.
C. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Use
Inventory considerations to map the demand type corresponding to schedule transaction to future
supplies.5. Use Inventory considerations to map the demand type corresponding to release
transaction to use only onhand supplies.6. Implement the Supply corrections user exit to only show
80% or 90% of supply as applicable.
D. 1. Create an extended status of PO "Created" which is "Approved".2. Create a new supply type
corresponding to the "Inbound approved" status.3. Map the PO status "Approved" to the supply
type "Inbound approved" and status "Created" to supply type "Purchase order placed".4. Use
Inventory considerations to map the demand type corresponding to schedule transaction to future
supplies.5. Use Inventory considerations to map the demand type corresponding to release
transaction to use only onhand supplies.6. Implement the Availability corrections user exit to only
show 80% or 90% of supply as applicable.
Answer: A

IBM덤프   C2050-241 pdf   C2050-241덤프   C2050-241   C2050-241   C2050-241

NO.6 A business requirement is to charge payment for the exchange order upfront and then refund
the customer when the returned item is received. This requirement should be configured as a:
A. even exchange.
B. regular exchange.
C. advanced exchange.
D. advanced pre-paid exchange.
Answer: D

IBM pdf   C2050-241 pdf   C2050-241   C2050-241   C2050-241 dump

NO.7 A retailer's delivery rules do not allow shipping for an open box television (TV) that is more
than 150 miles away. However, they do support moving this TV through a network of stores that are
spread throughout the country, until it reaches a store that supports delivery to the customer. The
retailer needs to configure such a multi-hop transfer of inventory through the supply chain and
provide an accurate promise date to a customer who is over 1000 miles away from the store with
the open box TV. In order to do so, Sterling Order Management considers all the following
configuration settings EXCEPT for:
A. Receiving store calendar.
B. Receipt Processing Time.
C. Delivery resource pool capacity.
D. Transfer relationship across stores.
Answer: C

IBM최신덤프   C2050-241   C2050-241인증   C2050-241

ITexamdump의 HH0-050덤프의 VCE테스트프로그램과 IIA-CIA-Part2덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 642-832시험에 대비한 고품질 덤프와 000-156시험 최신버전덤프를 제공해드립니다. 최고품질 74-338시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/C2050-241.html