ITExamDump 는 완전히 여러분이 인증시험준비와 안전이 시험패스를 위한 완벽한 덤프제공사이트입니다.우리 ITExamDump의 덤프들은 응시자에 따라 ,시험 ,시험방법에 따라 제품의 완성도도 다릅니다.그 말은 즉 알 맞춤 자료입니다.여러분은 ITExamDump의 알맞춤 덤프들로 아주 간단하고 편안하게 패스할 수 있습니다.많은 it인증관연 응시자들은 모두 우리ITExamDump가 제공하는 문제와 답 덤프로 자격증 취득을 했습니다.때문에 우리ITExamDump또한 업계에서 아주 좋은 이미지를 가지고 잇습니다
ITExamDump는Oracle인증1z1-485시험에 대하여 가이드를 해줄 수 있는 사이트입니다. ITExamDump는 여러분의 전업지식을 업그레이드시켜줄 수 잇고 또한 한번에Oracle인증1z1-485시험을 패스하도록 도와주는 사이트입니다. ITExamDump제공하는 자료들은 모두 it업계전문가들이 자신의 지식과 끈임없은 경헌등으로 만들어낸 퍼펙트 자료들입니다. 품질은 정확도 모두 보장되는 문제집입니다.Oracle인증1z1-485시험은 여러분이 it지식을 한층 업할수 잇는 시험이며 우리 또한 일년무료 업데이트서비스를 제공합니다.
Oracle인증 1z0-061시험취득 의향이 있는 분이 이 글을 보게 될것이라 믿고ITExamDump에서 출시한 Oracle인증 1z0-061덤프를 강추합니다. ITExamDump의Oracle인증 1z0-061덤프는 최강 적중율을 자랑하고 있어 시험패스율이 가장 높은 덤프자료로서 뜨거운 인기를 누리고 있습니다. IT인증시험을 패스하여 자격증을 취득하려는 분은ITExamDump제품에 주목해주세요.
Oracle 1z0-061인증시험을 어떻게 준비하면 될가 아직도 고민하고 계시죠? 학원에 등록하자니 시간도 없고 돈도 많이 들고 쉽게 엄두가 나지 않는거죠? ITExamDump제품을 구매하신다면 그런 부담을 이제 끝입니다. ITExamDump덤프는 더욱 가까지 여러분들께 다가가기 위하여 그 어느 덤프판매 사이트보다 더욱 저렴한 가격으로 여러분들을 맞이하고 있습니다. Oracle 1z0-061덤프는ITExamDump제품이 최고랍니다.
시험 이름: Oracle Database: SQL Fundamentals I
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1Z1-051 dump
100% 합격율 보장
Q&A: 254 문항 1Z1-051시험문제
업데이트: 2014-06-04
1Z1-051 dump: >>펼쳐보기
시험 이름: Exadata Database Machine Models X3-2 and X3-8 Implementation Essentials
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1z1-485자격증
100% 합격율 보장
Q&A: 71 문항 1z1-485시험덤프
업데이트: 2014-06-04
1z1-485자격증: >>펼쳐보기
시험 이름: Oracle Database 12c: SQL Fundamentals
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속 1z0-061 dump
100% 합격율 보장
Q&A: 75 문항 1z0-061교육
업데이트: 2014-06-04
1z0-061 dump: >>펼쳐보기
ITExamDump에서는 소프트웨어버전과 PDF버전 두가지버전으로 덤프를 제공해드립니다.PDF버전은 구매사이트에서 무료샘플을 다움받아 체험가능합니다. 소프트웨어버전은실력테스트용으로 PDF버전공부후 보조용으로 사용가능합니다. Oracle 인증1Z1-051덤프 무료샘플을 다운받아 체험해보세요.
Oracle 1z0-061인증시험은 전문적인 관련지식을 테스트하는 인증시험입니다. ITExamDump는 여러분이Oracle 1z0-061인증시험을 통과할 수 잇도록 도와주는 사이트입니다. 많은 분들이 많은 시간과 돈을 들여 혹은 여러 학원 등을 다니면서Oracle 1z0-061인증시험패스에 노력을 다합니다. 하지만 우리ITExamDump에서는 20시간 좌우만 투자하면 무조건Oracle 1z0-061시험을 패스할 수 있도록 도와드립니다.
1z1-485 덤프무료샘플다운로드하기: http://www.itexamdump.com/1z1-485.html
NO.1 Which two statements are true about enabling write-back flash cache?
A. When enabling write-back flash cache in a non rolling manner, it is important to ensure that
asmdeactivatonoutcome is set to YES and asmModestatus is set to ONLINE for all grid disks.
B. Before using write-back flash cache, you need to verify the minimum required versions.
C. Before write back-flash cache is enabled, you need to drop the Flash Cache first.
D. The setting flashCacheMode should be set to writeback by updating cellinit.ora and restarting
cellsrv.
E. When enabling write-back flash cache in a rolling manner, dcli should be used to inactivate the
grid disks on all cells first.
Answer: B,C
Oracle자격증 1z1-485 1z1-485시험자료
Explanation:
B: Exadata storage version 11.2.3.2.1 is the minimum version required to use this write back flash
cache option.
C: Steps for Enabling Write back flash cache:
First of all, you don't need the stop CRS or database (This is ROLLING method) ,you can do it cell
by cell.
*drop flashcache
*Be sure asmdeactivationoutcome is YES is before disabling grid disk
NO.2 Consider this CellCLI command:
CellCLI> CREATE GRIDDISK ALL HARDDISK PREFIX=data, size=423G;
Which two statements describe what happens when you execute this command?
A. It creates one 423 GB grid disk on the first available cell hard disk.
B. It creates one 423 GB grid disk on each available cell hard disk.
C. It creates grid disks on the outermost 423 GB that is available on each hard disk.
D. It creates grid disks on the innermost 423 GB that is available on each hard disk.
E. It creates an Exadata Smart Flash Cache on all flash drives.
Answer: B,C
Oracle자격증시험 1z1-485 IT시험덤프 1z1-485자격증자료 1z1-485자격시험 1z1-485시험정보
Explanation:
* Example: CellCLI> create griddisk all harddisk prefix=temp_dg, size=570G This command will
create 12 Griddisks, each of 570G in size from the outer (fastest) sectors of the underlying Harddisks.
It fills up the first 2 Celldisks entirely, because they have just 570G space free - the rest is already
consumed by the OS partition.
8. You get a Host Unreachable error when you attempt to connect to a server through a network
terminal command line. What are two other ways in which you can connect?
A. Use the ILOM Web GUI.
B. Use the dcli command at the root prompt on a database node.
C. Attach a terminal device to the back panel of the server with a serial cable.
D. Connect by using SQL *Plus.
E. Log in as root on the database node using the Net1 IP address.
Answer: A,C
Oracle최신덤프 1z1-485 Dump 1z1-485시험문제 1z1-485자격증 1z1-485 1z1-485시험문제
Explanation:
In addition to gaining shell access via SSH to manage your Exadata servers, you can also access them
from the Integrated Lights Out Management (ILOM) console or KVM console.
and should typically not require modifications unless you have changed network information inside
your database machine.
Note: A KVM switch (with KVM being an abbreviation for "keyboard, video and mouse") is a
hardware device that allows a user to control multiple computers from one or more[1] keyboard,
video monitor and mouse. Although multiple computers are connected to the KVM, typically a
smaller number of computers can be controlled at any given time
9. Identify three best practices for applying asmdeactivationoutcome es on Exadata Database
Servers and Exadata Storage Servers?
A. Backing up database servers and storage cells is not recommended before performing planned
maintenance.
B. Database server updates can be rolled back using the the "yum downgrade" procedure.
C. Bundle patches do not require testing before being installed on a production system.
D. It is recommended that Exadata systems with Data Guard configured use the "Standby First"
patching approach.
E. Patching should never be interrupted due to a connection drop. It is therefore recommended that
you use VNC or the screen utility.
F. Before patching cells in a rolling manner, you must check asmdeactivationoutcome amModestatus
and make sure that cells on all disks are online and that disks can be deactivated.
Answer: D,E,F
Oracle자격증덤프 1z1-485 IT국제자격증 1z1-485최신덤프 1z1-485 1z1-485시험문제 1z1-485덤프자료
10. The mpstat output from OS Watcher shows a database node as being 90% idle on an average.
What would you do to get a full picture of CPU utilization on the entire Exadata RAC cluster?
A. Average the mpstat id1 output from all the nodes.
B. Ask application users if they have noticed a slowdown in screen response.
C. Look for an increase in batch job servicing times.
D. A & B above
Answer: A
Oracle덤프자료 1z1-485 1z1-485자격증
NO.3 A customer has three databases named CC. FIN, and DW. The CC database is for their
CallCenter. Even a slight decrease in the response time of the database would mean more people
"on hold" in their data center. The orders received through the CallCenter are stored in the Finance
(FIN) database. Both databases, CC and FIN, serve as sources for the Data Warehouse (DW)
database. All databases use the same Automatic Storage Management (ASM) diskgroup and
therefore, the same physical disks on Exadata storage. The customer wants to dynamically control
the resources that are available for the CallCenter database because this has direct impact on their
operations?
Which option should be implemented?
A. DBRM on the CC database
B. DBRM on all the databases
C. IORM, because DBRM cannot be changed for an existing session
D. IORM and DBRM
Answer: B
Oracle시험문제 1z1-485자격증시험 1z1-485자격시험 1z1-485최신덤프
Explanation:
Using the Database Resource Manager, you can: Distribute available processing resources by
allocating percentages of CPU time to different users and applications. In a data warehouse, a
higher percentage may be given to ROLAP (relational on-line analytical processing) applications than
to batch jobs.
NO.4 Which is the best location to point your customer to, for finding the latest Exadata patches?
A. owner's guide
B. Patch database in MyOracle Support
C. MyOracle Support note 888828.1
D. MyOracle Support for database patches, ULN for OS patches, and Sun Support for Server and
InfiniBand patches.
Answer: B
Oracle인증 1z1-485시험문제 1z1-485교재 1z1-485시험문제
Explanation:
Before starting, we would like to share and note here two documents from My Oracle Support, aka
metalink. These notes must be the first place that you need to go to review before patching the
Exadata environment.
* (B) Database Machine and Exadata Storage Server 11g Release 2 (11.2) Supported Versions (Doc ID.
888828.1)
-This is for the second and third generation (V2 and X2) for Oracle Exadata, using Sun hardware.
* Database Machine and Exadata Storage Server 11g Release 1 (11.1) Supported Versions (Doc
ID. 835032.1)
* - This is for the first generation (V1) for Oracle Exadata, using HP hardware.
NO.5 Consider the following setup:
User A1 belongs to resource group High on Database A.
User B2 belongs to resource group Low on Database B.
User C3 is a user on Database C without any DBRM setup.
DBRM setup:
Database A: Resource group High gets 80% and Low gets 20%.
Database B: Resource group High gets 60% and Low gets 40%.
IORM setup:
Database A: Share=20, limit=5
Database B: Share=30, limit=10
Database C: 5 shares
Total number of shares in the IORM setup = 100
What percent of I/O will each database user theoretically be using when the Exadata storage unit
I/O throughout is used 100% and no other databases but A, B, and C are running?
A. Al = 36%, B2=18%, and C3=9%
B. Al = 33%, B2=33%, and C3=33%
C. AI = 10%, B2=5%, and C3=20%
D. Al = 8%, B2=12%, and C3=5%
E. Al = 5%, B2=10%, and C3=85%
Answer: E
Oracle 1z1-485인증 1z1-485 1z1-485강좌 1z1-485 Dumps
Explanation:
IORM setup limits Database A to 5%, and Database B is limited to 10%, while
Database C has not IORM limit.
Not that the resource groups are for CPU allocation.
NO.6 Consider the following software changes that are performed manually on a Linux server:
1.Changes for Linux kernel firewall configuration
2.Changes for custom performance monitoring tools
3.Changes for security scan tools
4.Changes for Linux system performance optimization
Which of the software changes listed are permitted on Exadata Storage Servers?
A. 1, 2, 3, and 4
B. only 3 '
C. none
D. only 2
E. only 1 and 2
F. only 2 and 3
Answer: E
Oracle자격증 1z1-485 1z1-485인증덤프 1z1-485덤프
Explanation:
1. The Storage Server Patch is responsible for keeping our cell nodes always up-todate, fixing
possible problems, and this patch includes different component patches, like kernel patches,
firmware, operation system, etc... for the Storage Server. Incorrect: 3,4: security scan tools changes
and Linux system performance optimization changes would be on the database server.
NO.7 Exadata Database Machine offers an Intelligent Platform Management Interface for the
various components in the Exadata product. Which option is true?
A. IPMI can be used to remotely start and stop servers.
B. IPMI can be used to remotely log in to the operating system.
C. IPMI commands can be executed by using SNMP traps.
D. IPMI settings can be secured by backing up the Oracle Linux installation on the storage system.
Answer: A
Oracle덤프자료 1z1-485 1z1-485덤프다운 1z1-485시험일정 1z1-485자격증시험 1z1-485자격증시험
Explanation:
IPMI - short for Intelligent Platform Management Interface - is an interface standard that allows
remote management of a server from another using standardized interface. The servers in the
Exadata Database Machine follow that. It's not an Exadata command but rather a general Linux one.
To power on a cell or database server, issue this from another server: # ipmitool -H prolcel01-ilom
-U root chassis power on
To stop a server, use the shutdown command. To stop immediately and keep it down, i.e. not reboot,
execute:# shutdown -h -y now
댓글 없음:
댓글 쓰기