저희가 알아본 데 의하면 많은it인사들이Oracle인증1z0-593시험을 위하여 많은 시간을 투자하고 잇다고 합니다.하지만 특별한 학습 반 혹은 인터넷강이 같은건 선택하지 않으셨습니다.때문에 패스는 아주 어렵습니다.보통은 한번에 패스하시는 분들이 적습니다.우리 ITExamDump에서는 아주 믿을만한 학습가이드를 제공합니다.우리 ITExamDump에는Oracle인증1z0-593테스트버전과Oracle인증1z0-593문제와 답 두 가지 버전이 있습니다.우리는 여러분의Oracle인증1z0-593시험을 위한 최고의 문제와 답 제공은 물론 여러분이 원하는 모든 it인증시험자료들을 선사할 수 있습니다.
Oracle인증1z0-593시험에 도전해보려고 없는 시간도 짜내고 거금을 들여 학원을 선택하셨나요? 사실 IT인증시험은 보다 간단한 공부방식으로 준비하시면 시간도 돈도 정력도 적게 들일수 있습니다. 그 방법은 바로ITExamDump의Oracle인증1z0-593시험준비덤프자료를 구매하여 공부하는 것입니다. 문항수도 적고 시험예상문제만 톡톡 집어 정리된 덤프라 시험합격이 한결 쉬워집니다.
우리는 여러분이 시험패스는 물론 또 일년무료 업데이트서비스를 제공합니다.만약 시험에서 실패했다면 우리는 덤프비용전액 환불을 약속 드립니다.하지만 이런 일은 없을 것입니다.우리는 우리덤프로 100%시험패스에 자신이 있습니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는Oracle인증1z0-593시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.
시험 번호/코드: 1z0-593
시험 이름: Oracle (Oracle Real Application Clusters 11g Essentials)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2014-01-18
ITExamDump에서는Oracle 인증1z0-593시험대비덤프를 발췌하여 제공해드립니다. Oracle 인증1z0-593시험대비덤프에는 시험문제의 모든 예상문제와 시험유형이 포함되어있어 시험준비자료로서 가장 좋은 선택입니다. ITExamDump에서 제공해드리는 전면적인Oracle 인증1z0-593시험대비덤프로Oracle 인증1z0-593시험준비공부를 해보세요. 통과율이 100%입니다.
ITExamDump의Oracle인증 1z0-593시험덤프공부가이드 마련은 현명한 선택입니다. Oracle인증 1z0-593덤프구매로 시험패스가 쉬워지고 자격증 취득율이 제고되어 공을 많이 들이지 않고서도 성공을 달콤한 열매를 맛볼수 있습니다.
1z0-593 덤프무료샘플다운로드하기: http://www.itexamdump.com/1z0-593.html
NO.1 Which command lists all the service-related information for the specified service? (crmdb is
the cluster database name and crms is the service name)
A. #crsctl config services -d cmdb -s crms
B. #srvctlconfig service -d cmdb -s crms
C. #srvctl getenv service -d crmdb -s crms
D. #crsctl status service -d crm -s crm -v
Answer: B
Oracle 1z0-593덤프 1z0-593 pdf 1z0-593최신덤프 1z0-593
Explanation:
*The srvctl config command displays the Oracle Restart configuration of the specified component or
set of components.
*srvctl config service For the specified database, displays the Oracle Restart configuration
information for the specified database service or for all database services
Incorrect: Not C: getenv
Gets and displays environment variables and their values from the Oracle Restart configuration for a
database, listener, or Oracle ASM instance.
srvctl getenv Summary
CommandDescription
*srvctl getenv asm Displays the configured environment variables for the Oracle ASM instance
*srvctl getenv database Displays the configured environment variables for the specified database
instance
*srvctl getenv listener Displays the configuredenvironment variables for the specified listener
Reference:SRVCTL Command Reference for Oracle Restart
NO.2 Choose two options that are not suitable for shared storage in a RAC 11g Release 2 database
created using DBCA.
A. Block device
B. Raw device
C. ASM
D. CFS
Answer: A,B
Oracle 1z0-593 1z0-593 dumps 1z0-593 pdf 1z0-593시험문제
Explanation:
Before you use DBCA to convert a single-instance database to an Oracle RAC or an
Oracle RAC One Node database, ensure that your system meets the following conditions:
/ It is a supported hardware and operating system software configuration.
/ It has shared storage: either Oracle Cluster File System (CFS) (not D) or Oracle ASM (not C) is
available and accessible from all nodes. On Linux on POWER systems, ensure that GPFS is
available and accessible from all nodes.
/ Your applications have no design characteristics that preclude their use with cluster database
processing.
Note:
*DBCA (Database Configuration Assistant) is a utility used for creating, configuring and removing
Oracle Databases.
Reference:Creating Oracle Real Application Clusters Databases with Database Configuration
Assistant
Reference:Converting to Oracle RAC and Oracle RAC One Node with DBCA
NO.3 Which two options are checked by the Oracle Universal Installer, when you first install Oracle
Software on a system?
A. if the OFA-compliant path is available
B. oraInst.loc should exist
C. that the user running the installation has permissions to write to the designated path
D. that you are running OUI as a DBA user
Answer: A,B
Oracle자격증 1z0-593덤프 1z0-593
Explanation:
A:
*When installing an OFA-compliant database using Oracle Universal Installer, ORACLE_BASE is
set to /pm/app/oracle by default.
*All Oracle products on CD-ROM are OFA-compliant; that is, Oracle Universal Installer places
Oracle products in directory locations that follow OFA guidelines
B: Every Oracle software installation has an associated Central Inventory where the details of all the
Oracle products installed on a host are registered. The Central Inventory is located in thedirectory
that the inventory pointer file specifies. Each Oracle software installation has its own Central
Inventory pointer file that is unknown to another Oracle software installation.
Default Inventory Pointer File Locations
PlatformDefault Inventory Pointer Location Linux LinuxPPC /etc/oraInst.loc AIX /etc/oraInst.loc
Solaris SPARC HPUX-IA64 HPUX-PARISC /var/opt/oracle/oraInst.loc Windows Windows.X64
Windows.IA64 HKEY_LOCAL_MACHINE/Software/Oracle/inst.loc
NO.4 You are creating an Oracle Cluster database using DBCA. The "Memory size (SGA and PGA)"
field is supplied on value of 2000 MB. The default Block used for the database is __________.
A. 2 KB
B. 4 KB
C. 8 KB
D. 16 KB
E. 32 KB
Answer: C
Oracle덤프 1z0-593 1z0-593덤프 1z0-593 1z0-593기출문제
Explanation:
Note: *In the Block Size list, enter the size in bytes or accept the default. Oracle Database data is
stored in these blocks. One data block corresponds to a specific number of bytes of physical space
on disk. While using pre-defined templates, this field is not enabled since the database will be
created with the default block size of 8 KB. But while using the custom option, you can change block
size. Selecting a block size other than the default 8 KB value requires advanced knowledge and
should only be done when absolutely required.
NO.5 Once OUI recognizes a set of nodes in a cluster, which three choices does it offer when
installing the Oracle Database 11g Release 2 software?
A. You can only install the Oracle Database with the RAC option on selected nodes.
B. OUI forcesyouto configure ASM for shared storage before proceeding.
C. You can install the Oracle Database as a single instance or with the RAC option on all the nodes.
D. You can install the Oracle Database as a single instance or with the RAC option on selected nodes.
E. You can install Oracle RAC One Node.
Answer: B,D,E
Oracle dumps 1z0-593자료 1z0-593 1z0-593최신덤프
Explanation:
B, D: Complete the prerequisite tasks for converting to an Oracle RAC database:
Oracle Clusterware and Oracle Database software is installed on all target nodes.
Oracle Clusterware is started.
(D)The Oracle Database binary is enabled for Oracle RAC on all target nodes.
(B) Shared storage is configured and accessible from all nodes.
User equivalency is configured for the operating system user performing the conversion.
Enterprise Manager agents are configured and running on all nodes, and are configured with the
cluster and host information.
The database being converted has been backed up successfully.
E:Installing Oracle RAC One Node is available starting with Oracle Database 11g Release 2
(11.2.0.2).
Note:
*By default, the standard Oracle Database 11g software installation process installs the Oracle
RAC option when OUI recognizes that you are performing the installation on a cluster.
NO.6 Select two Clusterware administration tasks that must be performed as the root user.
A. List the location of the voting disks.
B. Check the health and viability of the Clusterware on all nodes.
C. Disable the Clusterware from automatic start at node reboot.
D. Start the Clusterware manually on one node.
E. Check the health of the Clusterware on one node.
Answer: A,D
Oracle dump 1z0-593 dump 1z0-593 1z0-593
Explanation:
A:Voting disk management requires a valid and working OCR. Before you add, delete, replace, or
restore voting disks, run the ocrcheck command as root.
D: Example:
Restart the Oracle Clusterware stack in normal mode as root:
# crsctl start crs
NO.7 Which two actions do you need to take in Oracle Grid Infrastructure 11g Release 2 to enable
debugging for the resource ora.docrac.vip?
A. Make sure you are logged in as a privileged user.
B. crsctldebug res ora.docrac1.vip:1
C. crsctlset log res ora.docrac1.vip:1
D. crsctldebug log res ora.docrac1.vip:0
Answer: A,C
Oracle 1z0-593자격증 1z0-593덤프 1z0-593인증
Explanation:
A:You can use crsctl commands as the root user to enable dynamic debugging for the Oracle
Clusterware Cluster Ready Services (CRS), Oracle Cluster Registry (OCR), Cluster Synchronization
Services (CSS), and the Event Manager (EVM).
C: You can enable debugging for the CRS, OCR, CSS, and EVM modules and their components by
setting environment variables or by issuing crsctl debug commands using the following syntax:
crsctl debug log module_name component:debugging_level
Reference: Oracle Clusterware Administration and Deployment Guide,Component Level Debugging
NO.8 Which of these is not recommended as the basis for an ASM disk in a shared storage
configuration?
A. Raw disk partition
B. NFS file
C. Raw logical volumes
D. iSCSI targets
Answer: A
Oracle dump 1z0-593 1z0-593최신덤프 1z0-593덤프 1z0-593
Explanation:
*Block or raw devices are not supported by Oracle Universal Installer (OUI) or Database
Configuration Assistant (DBCA). However, manually configured raw or block devices are supported
by Oracle, but not recommended.
* Shared disk access requires some sort of networked storage
-
iSCSI (not D)
-
Fibre Channel/SCSI
-
NFS (not B)
*A logical volume issupported in less complicated configurations where a logical volume is mapped
to a LUN, or a logical volume uses disks or raw partitions.
NO.9 Which step will you have to perform on Windows to restore the OCR that you did not do on
Linux?
A. Identify existing backups with the -backup option
B. Use the Service Control Panel to stop services
C. Review the contents of the backup with the ocrdump command
D. Make sure that the restored OCR files are valid
Answer: B
Oracle dumps 1z0-593 1z0-593 1z0-593 1z0-593 dump
Explanation:
See step 2) below. Restoring the Oracle Cluster Registry on Windows-Based Systems
Use the following procedure to restore the OCR on Windows-based systems:
cluvfy comp ocr -n all [-verbose]
Note:
Restoring the Oracle Cluster Registry on UNIX-Based SystemsUse the following procedure to
restore the OCR on UNIX-based systems:
Repeat this command on each node in your Oracle RAC cluster.
Note:
Prior to running the crsctl start crs command in step 4, run the following command to verify that all
processes except init.cssd fatal are inactive:
ps -ef|grep cssd
Repeat this command on each node in your Oracle RAC cluster.
Reference: Oracle Database Oracle Clusterware and Oracle Real Application Clusters
Administration and Deployment Guide
NO.10 The Oracle Cluster Health Monitor can't _________.
A. Detect and analyze OS and duster resource for problems in Oracle Clusterware and RAC cluster
B. Track OS resource consumption at each node, process, and device level continuously
C. Be installed on Windows Server 20O3 SP1
D. Collect and analyze the cluster-wide data
Answer: C
Oracle 1z0-593인증 1z0-593자료
Explanation:
Incorrect: Oracle Cluster Health Monitoris designed to detect and analyze operating system (OS) and
cluster resource related degradation and failures in order to bring more explanatory power to many
issues that occur in clusters where Oracle Clusterware and Oracle RAC are running such as node
eviction. It continuously tracks the OS resource consumption at each node, process, and device level.
It collects and analyzes this cluster-wide data. In real time mode, when thresholds are hit, an alert is
shown to the operator. For root cause analysis, historical data can be replayed to understand what
was happening at the time of failure.
ITexamdump의 1z0-460덤프의 VCE테스트프로그램과 HP2-N37덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP0-J63시험에 대비한 고품질 덤프와 000-656시험 최신버전덤프를 제공해드립니다. 최고품질 70-489시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기