ITExamDump의Microsoft 070-462인증시험의 자료 메뉴에는Microsoft 070-462인증시험실기와Microsoft 070-462인증시험 문제집으로 나누어져 있습니다.우리 사이트에서 관련된 학습가이드를 만나보실 수 있습니다. 우리 ITExamDump의Microsoft 070-462인증시험자료를 자세히 보시면 제일 알맞고 보장도가 높으며 또한 제일 전면적인 것을 느끼게 될 것입니다.
Microsoft인증 070-462 시험은 최근 제일 인기있는 인증시험입니다. IT업계에 종사하시는 분들은 자격증취득으로 자신의 가치를 업그레이드할수 있습니다. Microsoft인증 070-462 시험은 유용한 IT자격증을 취득할수 있는 시험중의 한과목입니다. ITExamDump에서 제공해드리는Microsoft인증 070-462 덤프는 여러분들이 한방에 시험에서 통과하도록 도와드립니다. 덤프를 공부하는 과정은 IT지식을 더 많이 배워가는 과정입니다. 시험대비뿐만아니라 많은 지식을 배워드릴수 있는 덤프를ITExamDump에서 제공해드립니다. ITExamDump덤프는 선택하시면 성공을 선택한것입니다.
Microsoft인증070-462시험은 현재 치열한 IT경쟁 속에서 열기는 더욱더 뜨겁습니다. 응시자들도 더욱더 많습니다. 하지만 난이도난 전혀 낮아지지 않고 이지도 어려운 시험입니다. 어쨌든 개인적인 지식 장악도 나 정보기술 등을 테스트하는 시험입니다. 보통은Microsoft인증070-462시험을 넘기 위해서는 많은 시간과 신경이 필요합니다.
ITExamDump의 Microsoft인증070-462시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의Microsoft인증070-462시험덤프자료를 제공받을수 있습니다.
Microsoft인증사에서 주췌하는 070-462시험은 IT업계에 종사하는 분이시라면 모두 패스하여 자격증을 취득하고 싶으리라 믿습니다. ITExamDump에서는 여러분이 IT인증자격증을 편하게 취득할수 있게 도와드리는 IT자격증시험대비시험자료를 제공해드리는 전문 사이트입니다. ITExamDump덤프로 자격증취득의 꿈을 이루세요.
시험 번호/코드: 070-462
시험 이름: Microsoft (Administering Microsoft SQL Server 2012 Databases)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 88 문항
업데이트: 2013-12-08
ITExamDump의 도움을 받겠다고 하면 우리는 무조건 최선을 다하여 한번에 패스하도록 도와드릴 것입니다. 또한 일년무료 업뎃서비스를 제공합니다. 중요한 건 덤프가 갱신이 되면 또 갱신버전도 여러분 메일로 보내드립니다. 망설이지 마십시오. 우리를 선택하는 동시에 여러분은070-462시험고민을 하시지 않으셔도 됩니다.빨리 우리덤프를 장바구니에 넣으시죠.
070-462 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-462.html
NO.1 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
At 16:20 hours, you discover that pages 17, 137, and 205 on one of the database files are corrupted on
the transactional database. You need to ensure that the transactional database is restored.
You also need to ensure that data loss is minimal.
What should you do?
A. Perform a partial restore.
B. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
C. Perform a point-in-time restore.
D. Restore the latest full backup.
E. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
F. Perform a page restore.
G. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: F
Microsoft 070-462자료 070-462 dump 070-462
NO.2 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
One of the hard disk drives that stores the reporting database fails at 16:40 hours.
You need to ensure that the reporting database is restored. You also need to ensure that data loss is
minimal.
What should you do?
A. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
B. Perform a partial restore.
C. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
D. Perform a point-in-time restore.
E. Restore the latest full backup.
F. Perform a page restore.
G. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: H
Microsoft기출문제 070-462 070-462기출문제 070-462 dump 070-462
NO.3 You administer all the deployments of Microsoft SQL Server 2012 in your company.
A database contains a large product catalog that is updated periodically.
You need to be able to send the entire product catalog to all branch offices on a monthly basis.
Which configuration should you use?
A.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
BSQL Server that includes an application database configured to perform transactional replication
C.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
DTwo servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
E.SQL Server that includes an application database configured to perform snapshot replication
F.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
G.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
H.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
Answer: E
Microsoft 070-462 070-462 070-462 070-462
NO.4 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that data changes are sent to a non-SQL Server database server in near real time.
You also need to ensure that data on the primary server is unaffected.
Which configuration should you use?
A.SQL Server that includes an application database configured to perform transactional replication
B.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
C.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
D.SQL Server that includes an application database configured to perform snapshot replication
E.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
F.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
G.Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
H.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
Answer: A
Microsoft 070-462자격증 070-462시험문제 070-462
NO.5 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that an OLTP database that uses a storage area network (SAN) remains available if
any of the servers fail. You also need to minimize the amount of storage used by the database.
Which configuration should you use?
A.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
B.SQL Server that includes an application database configured to perform transactional replication
C.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
D.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
E.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
F.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
G.SQL Server that includes an application database configured to perform snapshot replication
H.Two servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
Answer: H
Microsoft pdf 070-462 070-462 070-462자격증 070-462
NO.6 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
The differential backup of the reporting database fails. Then, the reporting database fails at 14:00 hours.
You need to ensure that the reporting database is restored. You also need to ensure that data loss is
minimal.
What should you do?
A. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
B. Perform a point-in-time restore.
C Restore the latest full backup.
D. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
E. Restore the latest full backup. Then, restore the latest differential backup.
F. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
G. Perform a page restore.
H. Perform a partial restore.
Answer: C
Microsoft자격증 070-462 070-462 070-462 dumps
NO.7 You administer all the deployments of Microsoft SQL Server 2012 in your company.
You need to ensure that an OLTP database that includes up-to-the-minute reporting requirements can be
off-loaded from the primary database to another server. You also need to be able to add indexes to the
secondary database.
Which configuration should you use?
A.Two servers configured in different data centers
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
One server configured as an Active Secondary
B.Two servers configured in the same data center
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
One server configured as an Active Secondary
C.Two servers configured in the same data center
A primary server configured to perform log-shipping every 10 minutes
A backup server configured as a warm standby
D.Two servers configured in different data centers
SQL Server Availability Group configured in Asynchronous-Commit Availability Mode
E.Two servers configured on the same subnet
SQL Server Availability Group configured in Synchronous-Commit Availability Mode
F.SQL Server that includes an application database configured to perform transactional replication
G.SQL Server that includes an application database configured to perform snapshot replication
HTwo servers configured in a Windows Failover Cluster in the same data center
SQL Server configured as a clustered instance
Answer: F
Microsoft덤프 070-462자료 070-462자격증 070-462
NO.8 You administer a Microsoft SQL Server 2012 server that hosts a transactional database and a reporting
database. The transactional database is updated through a web application and is operational throughout
the day. The reporting database is only updated from the transactional database.
The recovery model and backup schedule are configured as shown in the following table:
At 14:00 hours, you discover that pages 71, 520, and 713 on one of the database files are corrupted on
the reporting database.
You need to ensure that the databases are restored. You also need to ensure that data loss is minimal.
What should you do?
A. Perform a partial restore.
B. Restore the latest full backup, and restore the latest differential backup. Then, restore each log backup
taken before the time of failure from the most recent differential backup.
C. Restore the latest full backup.
D. Restore the latest full backup, and restore the latest differential backup. Then, restore the latest log
backup.
E. Perform a page restore.
F. Restore the latest full backup. Then, restore each differential backup taken before the time of failure
from the most recent full backup.
G. Perform a point-in-time restore.
H. Restore the latest full backup. Then, restore the latest differential backup.
Answer: H
Microsoft pdf 070-462 070-462덤프 070-462자격증 070-462 070-462
NO.9 DRAG DROP
You administer three Microsoft SQL Server 2012 servers named ServerA, ServerB, and ServerC.
ServerA is the acting principal and ServerB is the mirror.
You need to add ServerC as a witness to the existing mirroring session between ServerA and ServerB.
You need to achieve this goal without delaying synchronization.
Which three actions should you perform in sequence? (To answer, move the appropriate actions from the
list of actions to the answer area and arrange them in the correct order.)
Answer:
NO.10 You administer a Microsoft SQL Server 2012 database.
You create an availability group named haContosoDbs. Your primary replica is available at
Server01\Contoso01.
You need to configure the availability group to have the highest availability. You also need to ensure that
no data is lost.
Which Transact-SQL statement should you use?
A. Option A
B. Option B
C. Option C
D. Option D
Answer: C
Microsoft 070-462 070-462 070-462 070-462
ITexamdump의 HP5-T01D덤프의 VCE테스트프로그램과 HH0-240덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 NS0-155시험에 대비한 고품질 덤프와 1z0-559시험 최신버전덤프를 제공해드립니다. 최고품질 000-087시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기