2013년 10월 9일 수요일

EMC 자격증 E20-326 시험문제와 답

ITExamDump는 고객님의 IT자격증취득의 작은 소원을 이루어지게 도워드리는 IT인증시험덤프를 제공해드리는 전문적인 사이트입니다. ITExamDump 표 EMC인증E20-326시험덤프가 있으면 인증시험걱정을 버리셔도 됩니다. ITExamDump 표 EMC인증E20-326덤프는 시험출제 예상문제를 정리해둔 실제시험문제에 가장 가까운 시험준비공부자료로서 공을 들이지않고도 시험패스가 가능합니다.

네트워크 전성기에 있는 지금 인터넷에서EMC 인증E20-326시험자료를 많이 검색할수 있습니다. 하지만 왜ITExamDump덤프자료만을 믿어야 할가요? ITExamDump덤프자료는 실제시험문제의 모든 유형에 근거하여 예상문제를 묶어둔 문제은행입니다.시험적중율이 거의 100%에 달하여EMC 인증E20-326시험을 한방에 통과하도록 도와드립니다.

ITExamDump의 도움으로 여러분은 많은 시간과 돈을 들이지 않으셔도 혹은 여러학원등을 다니시지 않으셔도 우리 덤프로 안전하게 시험을 통과하실 수 있습니다.EMC E20-326시험자료는 우리 ITExamDump에서 실제시험에 의하여 만들어진 것입니다. 지금까지의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는EMC E20-326시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.

인테넷에 검색하면 EMC E20-326시험덤프공부자료가 헤아릴수 없을 정도로 많이 검색됩니다. 그중에서ITExamDump의EMC E20-326제품이 인지도가 가장 높고 가장 안전하게 시험을 패스하도록 지름길이 되어드릴수 있습니다.

EMC E20-326인증은 아주 중요한 인증시험중의 하나입니다. ITExamDump의 베터랑의 전문가들이 오랜 풍부한 경험과 IT지식으로 만들어낸 IT관연인증시험 자격증자료들입니다. 이런 자료들은 여러분이EMC인증시험중의E20-326시험을 안전하게 패스하도록 도와줍니다. ITExamDump에서 제공하는 덤프들은 모두 100%통과 율을 보장하며 그리고 일년무료 업뎃을 제공합니다

우리사이트가 다른 덤프사이트보다 우수한 점은 바로 자료들이 모두 전면적이고 적중률과 정확입니다. 때문에 우리ITExamDump를 선택함으로EMC인증E20-326시험준비에는 최고의 자료입니다. 여러분이 성공을 위한 최고의 자료입니다.

ITExamDump를 선택함으로 여러분은 EMC 인증E20-326시험에 대한 부담은 사라질 것입니다.우리 ITExamDump는 끊임없는 업데이트로 항상 최신버전의 EMC 인증E20-326시험덤프임을 보장해드립니다.만약 덤프품질을 확인하고 싶다면ITExamDump 에서 무료로 제공되는EMC 인증E20-326덤프의 일부분 문제를 체험하시면 됩니다.ITExamDump 는 100%의 보장도를 자랑하며EMC 인증E20-326시험을 한번에 패스하도록 도와드립니다.

시험 번호/코드: E20-326
시험 이름: EMC (Symmetrix Solutions Design Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 132 문항
업데이트: 2013-10-08

E20-326 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-326.html

NO.1 You are designing a new disaster recovery solution with VMAX arrays. During the initial project kick-off
meeting, the customer reports their environment can tolerate five minutes or less of data recovery
following a disaster but have not yet determined the maximum allowable downtime for their applications.
The customer asks which remote replication methods you recommend for their environment.
What do you recommend?
A. Defer making a recommendation until the application RTO is known.
B. Recommend the disaster recovery solution as described in the Sales Order.
C. Defer making a recommendation until the application RPO in known.
D. Recommend the disaster recovery solution described in the Statement of Work.
Answer: A

EMC   E20-326   E20-326   E20-326

NO.2 You are designing a new disaster recovery solution with VMAX arrays. During the initial project kick-off
meeting, the customer reports the maximum allowable downtime for their applications is ninety minutes,
but they have not yet determined how much data recovery following a disaster their environment can
tolerate.
The customer asks which remote replication method you recommend for their environment.
What do you recommend.?
A. Defer making a recommendation until the application RPO in known.
B. Recommend the disaster recovery solution as described in the Sales Order.
C. Defer making a recommendation until the application RTO is known.
D. Recommend the disaster recovery solution described in the Statement of Work.
Answer: A

EMC자료   E20-326   E20-326최신덤프

NO.3 A Symmetrix VMAX has been configured with Dynamic Cache Partitions.
What is a criterion that must be met for a cache slot to be eligible for donation?
A. The fall through time must be greater than the donation age
B. The fall through time must be less than the donation age
C. The cache slot must belong to a static partition
D. There must be available cache slots in the default partition
Answer: A

EMC   E20-326기출문제   E20-326

NO.4 You are designing a new VMAX array. The customer requires high performance for their random
write-intensive application. Which RAID protection should you recommend?
A. RAID-5
B. RAID-6
C. RAID-1
D. RAID-S
Answer: C

EMC   E20-326자료   E20-326 dumps

NO.5 You are designing a new VMAX array. The customer's primary concern is maximizing capacity
available to the host. What RAID protection should you recommend?
A. RAID-5 (7+1)
B. RAID-6 (6+2)
C. RAID-1/0
D. RAID-5 (3+1)
Answer: A

EMC   E20-326최신덤프   E20-326

NO.6 A Symmetrix VMAX hosts four applications. Each application is assigned a named dynamic cache
partition. Two of the partitions are static and two are flexible. The write pending limit for each partition is
set to 60%.
What will happen if an application running in a static partition reaches the write pending limit set for that
partition?
A. Cache will be borrowed from a flexible partition
B. Cache will be borrowed from the default partition
C. Host write activity to that partition will be throttled
D. The write pending limit of the partition will be raised until it reaches 80%
Answer: C

EMC인증   E20-326   E20-326 dump   E20-326

NO.7 What is a best practice when configuring a Symmetrix VMAX for optimal performance and cost?
A. Different drive types are mixed and spread throughout the array.
B. Dedicated engines have appropriate drive types to meet application needs.
C. A dedicated array with Enterprise Flash Drives (EFD).
D. A dedicated array based upon application requirement.
Answer: A

EMC인증   E20-326시험문제   E20-326시험문제   E20-326자료

NO.8 A TimeFinder/Snap of production data must be recreated in a two hour cycle throughout the day.
Which change tracker report will provide the best data for modeling a solution for the twenty-four hour
period?
A. Delta report reset every two hours
B. SUM report over two hours
C. Delta report reset every twenty four hours
D. SUM report over twenty four hours
Answer: A

EMC   E20-326   E20-326 dumps   E20-326기출문제

NO.9 You are proposing a new VMAX array with FAST VP. The customer reports their application needs a
small amount of EFD capacity and asks whether 200 GB EFDs or 400 GB EFDs would provide better
overall performance. Which drive size do you recommend and why?
A. 400 GB EFDs. They support higher IOPS than 200 GB EFDs.
B. 200 GB EFDs. They support higher I/O density than 400 GB EFDs.
C. 400 GB EFDs. They support higher I/O density than 200 GB EFDs.
D. 200 GB EFDs. They support higher IOPS than 400 GB EFDs.
Answer: B

EMC   E20-326덤프   E20-326   E20-326   E20-326인증   E20-326

NO.10 A customer is interested in utilizing SRDF/AR to generate a remote copy of an application with an RPO
of six hours. In order for you to calculate the bandwidth requirements you will need to run Change Tracker.
To which should you set the reset interval length for DeltaMark?
A. 21600
B. 86400
C. 32400
D. 10800
Answer: D

EMC자격증   E20-326최신덤프   E20-326

NO.11 A major telecommunications operator is planning to consolidate multiple mid-tier storage arrays to a
single Symmetrix VMAX solution. Their existing environment includes IBM AIX servers, HP-UX Servers
and Windows 2003 Servers.
When documenting the existing Server environment, which command can be used on the HP-UX Servers,
to list the software modules installed?
A. swlist
B. lslpp
C. pkginfo
D. pkgchk
Answer: A

EMC   E20-326자격증   E20-326자료

NO.12 A customer plans to migrate existing AIX and Windows hosts as well as Mainframe z/OS LPARs to a
new VMAX array. Performance data is needed to design the VMAX volumes configuration layout. Which
host performance data do you request from the customer?
A. STP, SAR, WRKDSKSTS
B. SAR, Perfmon, WRKDSKSTS
C. IOSTAT, Perfmon, SMF/CMF
D. IOSTAT, SAR, SMF/CMF
Answer: C

EMC   E20-326   E20-326자료   E20-326덤프

NO.13 A major telecommunications operator is planning to consolidate multiple mid-tier storage arrays to a
single Symmetrix VMAX solution. Their existing environment includes IBM AIX servers, HP-UX Servers
and Windows 2003 Servers.
When documenting the existing Server environment, which command can be used on the AIX Servers, to
list the software modules installed?
A. pkginfo
B. lslpp
C. swlist
D. cfgmgr
Answer: B

EMC시험문제   E20-326최신덤프   E20-326 dump

NO.14 Prior to starting an implementation, which tool should be used to automate the data collection on a
Windows host?
A. EMCGrab
B. EMCReports
C. E-Lab Advisor
D. Change Tracker
Answer: B

EMC   E20-326   E20-326 dumps

NO.15 A customer will migrate existing AIX, HP-UX and Windows hosts from a DMX-3 to a new VMAX array.
You need performance data from the existing array to design to the new VMAX volumes configuration
layout. Which tools can be used to collect Symmetrix array performance data?
A. ControlCenter Performance Manager and STP Collector
B. EMC Workload Generator and STP Navigator
C. Storage Configuration Advisor and STP Collector
D. ControlCenter Performance Manager and SymmMerge
Answer: A

EMC   E20-326   E20-326   E20-326 dumps

NO.16 A Symmetrix VMAX hosts four applications. Each application is assigned a named dynamic cache
partition. Two of the partitions are static and two are flexible. The write pending limit for each partition is
set to 60%.
What will happen if an application running in a flexible partition reaches the write pending limit set for that
partition?
A. Host write activity to that partition will be throttled
B. Cache will be borrowed from the other flexible partition
C. Cache will be borrowed from the default partition
D. The write pending limit of the partition will be raised until it reaches 80%
Answer: A

EMC인증   E20-326덤프   E20-326

NO.17 A customer is interested in utilizing TimeFinder/Snap to generate a backup copy of an application
every six hours. In order for you to calculate the SAVE Pool requirements you will need to run Change
Tracker. To which value should you set the reset interval length for DeltaMark?
A. 21600
B. 10800
C. 86400
D. 32400
Answer: A

EMC자료   E20-326   E20-326시험문제   E20-326덤프

NO.18 Prior to starting an implementation, which tool should be used to automate the data collection on a UNIX
host?
A. EMCGrab
B. EMCReports
C. E-Lab Advisor
D. Change Tracker
Answer: A

EMC자료   E20-326   E20-326

NO.19 A TimeFinder/Snap of production data must be recreated in a four hour cycle throughout the day.
Which change tracker report will provide the best data for modeling a solution for the twenty-four hour
period?
A. Delta report reset every four hours
B. SUM report over four hours
C. Delta report reset every twenty four hours
D. SUM report over twenty four hours
Answer: A

EMC   E20-326덤프   E20-326인증   E20-326자료

NO.20 A customer plans to migrate existing AIX, HP-UX and IBM iSeries hosts to a new VMAX array.
Performance data is needed to design the VMAX volumes configuration layout.
What host performance data do you request from the customer?
A. IOSTAT, SAR, WRKDSKSTS
B. STP, Perfmon, SMF/CMF
C. IOSTAT, STP, WRKDSKSTS
D. Perfmon, SAR, SMF/CMF
Answer: A

EMC   E20-326   E20-326기출문제   E20-326   E20-326 dumps   E20-326 dump

ITexamdump의 1Y0-A19덤프의 VCE테스트프로그램과 100-101덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 70-465시험에 대비한 고품질 덤프와 1z0-460시험 최신버전덤프를 제공해드립니다. 최고품질 000-273시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/E20-326.html

댓글 없음:

댓글 쓰기