HP HP0-Y30 인증시험

IT자격증을 많이 취득하여 IT업계에서 자신만의 단단한 자리를 보장하는것이 여러분들의 로망이 아닐가 싶습니다. ITExamDump의 완벽한 HP인증 HP0-Y30덤프는 IT전문가들이 자신만의 노하우와 경험으로 실제HP인증 HP0-Y30시험문제에 대비하여 연구제작한 완벽한 작품으로서 100%시험통과율을 보장합니다.

네트워크 전성기에 있는 지금 인터넷에서HP 인증HP0-Y30시험자료를 많이 검색할수 있습니다. 하지만 왜ITExamDump덤프자료만을 믿어야 할가요? ITExamDump덤프자료는 실제시험문제의 모든 유형에 근거하여 예상문제를 묶어둔 문제은행입니다.시험적중율이 거의 100%에 달하여HP 인증HP0-Y30시험을 한방에 통과하도록 도와드립니다.

IT업계 종사자라면 누구나 HP 인증HP0-Y30시험을 패스하고 싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 맞습니다. 패스할 확율은 아주 낮습니다. 노력하지 않고야 당연히 불가능한 일이 아니겠습니까? HP 인증HP0-Y30 시험은 기초 지식 그리고 능숙한 전업지식이 필요 합니다. ITExamDump는 여러분들한테HP 인증HP0-Y30시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. ITExamDump의HP 인증HP0-Y30시험관련 자료로 여러분은 짧은 시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.

시험 번호/코드: HP0-Y30
시험 이름: HP (Implementing HP Networking Technologies)

만약 여러분은HP HP0-Y30인증시험취득으로 이 치열한 IT업계경쟁 속에서 자기만의 자리를 잡고, 스펙을 쌓고, 전문적인 지식을 높이고 싶으십니까? 하지만HP HP0-Y30패스는 쉬운 일은 아닙니다.HP HP0-Y30패스는 여러분이 IT업계에 한발작 더 가까워졌다는 뜻이죠. 하지만 이렇게 중요한 시험이라고 많은 시간과 정력을 낭비할필요는 없습니다. ITExamDump의 완벽한 자료만으로도 가능합니다. ITExamDump의 덤프들은 모두 전문적으로 IT관련인증시험에 대하여 연구하여 만들어진것이기 때문입니다.

HP0-Y30 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y30.html

NO.1 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch at
factory default settings.?
Switch# exit
A. The user is logged out of the console.
B. The privilege level moves from manager to operator.
C. Unsaved configuration changes are deleted.
D. The user exits from configuration mode.
Answer: B

HP   HP0-Y30   HP0-Y30 dumps   HP0-Y30

NO.2 What is a fit Access Point?
A. an AP that can provide WLAN services without a controller
B. an AP that has no intelligence and requires a wireless controller
C. an AP that can be deployed autonomously or with a controller
D. an AP that provides some intelligence under the management of a controller
Answer: D

HP자격증   HP0-Y30   HP0-Y30자료   HP0-Y30

NO.3 At the CLI of an HP E5406 zl switch, you have assigned ports A1-A4 to VLAN 70 as untagged
members. All other configuration parameters on the E5406 zl are at default settings. The E5406 zl is
connected through port B1 to an HP E8212 zl switch. The E8212 zl has been configured with an IP
interface associated with VLAN 70, and IP routing has been enabled. On the E5406 zl, what must you do
to enable the E8212 zl to act as default gateway for VLAN 70 clients?
A. Define an IP interface in VLAN 70.
B. Configure port B1 to be a member of VLAN 70.
C. Define the VLAN 70 IP address of the E8212 zl as the default gateway.
D. Add a static route to the E8212 to the E5406 zl route table.
Answer: B

HP   HP0-Y30   HP0-Y30덤프

NO.4 Which HP E-Series switch models are fixed-port switches? (Select two.)
A. E8212 zl
B. E4204 vl
C. E6600-24G
D. E5406 zl
E. E3500-48G yl
Answer: CE

HP기출문제   HP0-Y30인증   HP0-Y30최신덤프

NO.5 You must configure a port on an A5800 switch to support protocol-based VLANs and port-based
VLANs. Which port type supports this requirement?
A. hybrid
B. access
C. aggregated
D. trunk
E. tagged
Answer: A

HP인증   HP0-Y30인증   HP0-Y30   HP0-Y30

NO.6 Which HP E-Series switch features redundant management and fabric modules?
A. E2910 al
B. E8212 zl
C. E5412 zl
D. E4208 vl
Answer: B

HP최신덤프   HP0-Y30   HP0-Y30   HP0-Y30

NO.7 Which interface is available for managing A-Series switches at factory default settings?
A. Telnet
B. menu
C. console
D. web
Answer: C

HP자료   HP0-Y30   HP0-Y30   HP0-Y30최신덤프

NO.8 You have initiated a console session on an HP A-Series switch at default settings. What is your
privilege level?
A. Visit (0)
B. Monitor (1)
C. System (2)
D. Manage (3)
Answer: D

HP자료   HP0-Y30시험문제   HP0-Y30   HP0-Y30

NO.9 You must define a hostname on an HP E5400 zl Series switch. Which configuration context must you
enter to perform this task?
A. manager
B. system
C. administrator
D. global configuration
Answer: D

HP   HP0-Y30   HP0-Y30   HP0-Y30최신덤프   HP0-Y30기출문제

NO.10 Which view is indicated by the following prompt on an HP A7500 switch? <A7500>
A. system
B. operator
C. user
D. console
Answer: C

HP기출문제   HP0-Y30자격증   HP0-Y30자격증   HP0-Y30인증   HP0-Y30덤프

NO.11 What is the effect of the following command entered at the CLI of an HP E5400 zl Series switch?
Switch(vlan-100)# end
"Pass Any Exam. Any Time." - www.actualtests.com 3
A. The CLI displays the Operator prompt.
B. The CLI displays the Manager prompt.
C. VLAN 100 is deleted from the switch.
D. The CLI displays the global configuration prompt.
Answer: D

HP   HP0-Y30 dumps   HP0-Y30덤프   HP0-Y30인증

NO.12 You must configure SSH on an HP A7500 switch. Which item must be generated on the switch?
A. passphrase
B. shared secret
C. self-signed certificate
D. encryption keys
Answer: D

HP최신덤프   HP0-Y30   HP0-Y30   HP0-Y30   HP0-Y30

NO.13 What is the effect of the following command entered at the CLI of an HP E3500 yl switch?
E3500(vlan-44)#interface 23
A. The CLI displays the status of port 23.
B. Port 23 becomes a member of VLAN 44.
C. Port 23 is enabled.
D. The CLI enters the configuration context for port 23.
Answer: D

HP dumps   HP0-Y30   HP0-Y30

NO.14 You must reset the startup configuration of an HP A-Series switch to factory defaults. Which CLI view
will enable you to complete this task?
A. manager view
B. global configuration view
C. system view
D. user view
Answer: D

HP   HP0-Y30최신덤프   HP0-Y30

NO.15 You must configure VLANs and ports on an HP A7500 switch at default settings. What is the effect of
the following commands?
[SW-Gigabit-Ethernet1/0/1]port link-type trunk [SW-Gigabit-Ethernet1/0/1]port trunk permit vlan 100 101
A. The switch will forward traffic for VLANs 100 and 101 with 802.1Q tags. Traffic for VLAN 1 will be
untagged. Traffic for all other VLANs will be discarded.
B. The switch will add port 1/0/1 to a Link Aggregation Group (LAG) that is a tagged member of VLANs
100 and 101.
C. The switch will forward traffic for VLANs 100 and 101, but will discard traffic for all other VLANs.
D. The switch will forward VLAN 101 traffic with 802.1Q tags. VLAN 100 traffic will be untagged.
Answer: A

HP dump   HP0-Y30 dump   HP0-Y30   HP0-Y30기출문제   HP0-Y30

NO.16 You have uploaded an application file named "A12500.bin" to an HP A12500 switch.
Which command ensures this file is used during the next boot cycle?
A. boot-file cf:/A12500.bin main
B. load appfile cf:/A12500.bin main
C. boot-loader file cf:/A12500.bin main
D. set boot file cf:/A12500.bin main
Answer: C

HP   HP0-Y30 dump   HP0-Y30   HP0-Y30   HP0-Y30   HP0-Y30최신덤프

NO.17 You have entered the following command at the CLI of an HP E5400 zl Series switch. Switch(vlan-1)# ip
address 192.168.1.225/24
The switch's other VLAN and IP parameters are at factory defaults. While testing this configuration, you
find that the switch cannot ping a server located at 192.168.2.22. You have confirmed the server is up and
available. This server is located in a data center not directly connected to your switch.
What must you configure on the switch to enable connectivity between these two devices?
A. Add a default gateway.
B. Modify the IP address to 192.168.1.225/26.
C. Enable IP routing.
D. Add the server to allowed hosts list.
Answer: A

HP dumps   HP0-Y30   HP0-Y30

NO.18 Click the Exhibit button.
Which statement accurately describes the state of Gigabit Ethernet 3/0/12 in the HP A-Series switch
configuration shown in the exhibit?
A. The interface will be a tagged member of VLAN 12.
B. The interface will be an untagged member of VLAN 1.
C. The interface will be an untagged member of VLAN 12.
D. The interface will drop all incoming packets for VLAN 12.
Answer: C

HP자료   HP0-Y30 dumps   HP0-Y30   HP0-Y30

NO.19 Which A-Series switch is designed for the large data center and the enterprise core?
A. A5820
B. A7500
C. A9500
D. A12500
Answer: D

HP자료   HP0-Y30   HP0-Y30   HP0-Y30   HP0-Y30

NO.20 Which type of port can handle more than one untagged VLAN on an HP A-Series switch?
A. trunk
B. access
C. aggregated
D. hybrid
Answer: D

HP   HP0-Y30   HP0-Y30   HP0-Y30 dumps   HP0-Y30최신덤프   HP0-Y30최신덤프

ITExamDump를 선택함으로, ITExamDump는 여러분HP인증HP0-Y30시험을 패스할 수 있도록 보장하고,만약 시험실패시 ITExamDump에서는 덤프비용전액환불을 약속합니다.